|
|
4" pipe
Dec 8, 2008 13:15:20 GMT -5
Post by cumminseeme on Dec 8, 2008 13:15:20 GMT -5
Where can I get a good deal on 4" exhaust pipe? Getting ready to put stacks on my Dodge.
|
|
|
|
4" pipe
Dec 8, 2008 14:21:29 GMT -5
Post by lojim on Dec 8, 2008 14:21:29 GMT -5
You can try 4wd hardware. They mostly deal in Jeeps - but they might be able to help you out. You can always see about welding your own system too. 4" pipe is not that hard to come by - but welding it will take some work. If you want something done right - check out Liberator in Carlisle. www.liberatorperformance.net/ They will make your Dodge rumble! |
|
|
|
4" pipe
Dec 8, 2008 16:02:47 GMT -5
Post by cumminseeme on Dec 8, 2008 16:02:47 GMT -5
Just need adapters from what I've looked at. Already have 4" under the truck. And bought used stacks of a wrecked truck. So alreay have the Y pipe and the stacks. Just need the adapters and angle pipe to connect the 2. Oh yeah its gonna rumble. And ting alittle. Straight tops with flappers! Just for now.
|
|
|
|
4" pipe
Dec 8, 2008 19:15:12 GMT -5
Post by lojim on Dec 8, 2008 19:15:12 GMT -5
I'm not sure if Midas deals in those types of pipes. It should be something that can be ordered somewhere - but most places that I know you can order the whole kit - or buy a replacement stock part. You might find that you should not need something fabricated - but depending on where you find that pipe it might be easier/cheaper.
Sorry I'm not any help - but I want to see pics when it is done!
|
|
|
|
4" pipe
Dec 8, 2008 19:59:11 GMT -5
Post by cumminseeme on Dec 8, 2008 19:59:11 GMT -5
I'll get you some pics when its done. Maybe get a couple of rollin smoke too. Need to get you some of the quad with new rims and tires yet too.
|
|
|
|
Post by krawler97 on Dec 9, 2008 1:06:27 GMT -5
You probably won't find anything local, I already checked around for mine and all everyone had was 3" infact I couldn't even get 3.5" local. Just use 1/8" tubing or pipe.
|
|
