rockzj
Web-Wheeler
Grand Overlord!
Posts: 24
|
Post by rockzj on May 7, 2008 19:57:32 GMT -5
Looking to get rid of my LP30 and stick a Rubi 44 in the front of the ZJ. I know it still uses 30 outers but anything is better than what I have haha. If someone comes across one or knows someone selling one let me know
RockZJ
|
|
chad
Web-Wheeler
Posts: 23
|
Post by chad on May 7, 2008 21:01:57 GMT -5
check out jeepforum.com You should easily be able to find one there, or on pirate4x4. Its probably going to be at least $800
|
|
rockzj
Web-Wheeler
Grand Overlord!
Posts: 24
|
Post by rockzj on May 7, 2008 21:54:31 GMT -5
Im cool with paying 800 if it has the air locker pump and the wiring setup. I searched like 13 pages in and only found one. I think im going to hold onto some cash from the build and try and source one of these. I was going to "beef" up the 30 but its really a waste of time. The goal is to find a 44 for the front, an 8.8 for the rear and call it a day. If someone comes across one let me know
RockZJ
|
|
|
Post by krawler97 on May 8, 2008 19:09:08 GMT -5
If you think you can wait awhile I'm thinking of selling mine, probably be about $1700. Comes with warn manual hubs, 1/2" thick tubes (not rubicon's 1/4"), of course locker with all hardware (I even have extra air hose), 4:88 r/p, Alloy shafts, outter knuckles, brake rotors (they are for a CJ and machined down to 11"), and I could even weld on CA skids if you wanted them. The axle is not even a year old and has never been on the street so probably about 2-300 miles on it. It's all custom just has the factory mounts on it.
|
|
|
Post by dean on May 8, 2008 20:37:43 GMT -5
and his axle is a REAL dana44 josh, not a fake dana44/dana30 like the rubi axles
|
|
|
Post by krawler97 on May 8, 2008 22:12:54 GMT -5
By the way there is approx. $4,000 invested into it the only thing that is standard is the 44 diff housing. Just a thought though not completely sure if I'm gonna sell it or not, have to see how much it will cost me to build up a 60 front.
|
|